CPR/STAT Model HLR 301

The CPR/STAT is our original automated CPR device

The Dependable and Cost Effective CPR System: 
The CPR/STAT is our original automated CPR device
  • Delivers firm, consistent, and accurate chest compressions at a rate of 100/minute
  • Offers automated ventilations (Rescue Breaths) interposed with chest compressions
  • Provides compression/ventilation ratio of 5:1 or continuous compressions
Sets Up Fast:
  • Transitions easily from manual CPR
  • Takes only five seconds to apply the “Quick-Fit” Chest Compressor
  • Keeps airways open by positioning the patient’s neck via the contoured backboard
  • Uses the proprietary Patient Five Point Restraining System that keeps the unit securely in place during transportation and resuscitation
  • Frees emergency personnel for other life-saving procedures
Provides total mobility:
Chest_Compressor_-_DSC_5360
  • Has a lightweight, custom padded carrying-case
  • Weighs 17 pounds
  • Operates on 100 percent Oxygen
  • Requires no electricity or batteries
  • Performs essential life support functions anywhere medical emergencies occur
  • Fits perfectly on the Life Support Liter  (Model S-410) (this is a link)
Accessories Available: (note: these link to accessories)
  • Oxygen Tanks “D” or “E”
  • IV Pole and Connector
  • Mobile Oxygen System (sold with or without tanks)
  • Esophageal Obturator Airway (EOA) Kit
  • Esophageal Gastric Tube Airway (EGTA) Kit
  • Suction Aspirator
  • Trans fill device for Oxygen Cylinders
  • Hospital /Ambulance Regulator
  • Oxygen Mask with Flow Control
Physical Specifications:
O2_Tanks_-_DSC_5189cropped
  • Size: 20in. W x 17in. D x 5in. H (50.8 cm. W x 43.1cm. D x 12.7cm. H)
Weight:
  • 17 lbs Including Chest Compressor (6.8 kg.)
Material:
  • Exterior Covers – Medical Grade Kydek Polymer
  • Compressor Cylinder – Medical Grade High Impact Polycarbonate
Operational Information:
  • Power Source: Compressed Oxygen
  • Required Pressure: 50 – 90 PSI (4 – 6 BAR)
  • Oxygen Concentration: 100 % During Resuscitation
  • Compression Rate: 100 Compressions per minute       
  • Compression Force: 0-70 kilograms of thrust
  • Operating Temperature:  32 degree to 122 degree F (0 degree to 50 degree C)  
Packaging Details:

Exterior Shipping  Box :

  • Size: 26in. L x 9in.W x 24in. H (66.04cm. L x 22.86cm W x 60.96cm. H)
  • Grade: 275 Double Wall Construction  (275 lb/sq-in)
  • Capacity:  90 lb
  • Material:  Double Wall Corrugated Material

Internal Packaging:

  • Sealed Air Foam Packaging: (2) Sheets Surrounding the HLR-301
  • Bubble Wrap: All Accessories are protected by Industrial Strength Bubble Wrap
  • Inserts: Corrugated sheets are placed in the bottom and in the top of the shipping box





The CPR/STAT is our original automated CPR device

 

The Dependable and Cost Effective CPR System:        

·        Delivers firm, consistent, and accurate chest compressions at a rate of 100/minute 

·        Offers automated ventilations (Rescue Breaths) interposed with chest compressions 

·        Provides compression/ventilation ratio of 5:1 or continuous compressions 

 

Sets Up Fast:

·        Transitions easily from manual CPR

·        Takes only five seconds to apply the “Quick-Fit” Chest Compressor

·        Keeps airways open by positioning the patient’s neck via the contoured backboard 

·        Uses the proprietary Patient Five Point Restraining System that keeps the unit securely in place during transportation and resuscitation

·        Frees emergency personnel for other life-saving procedures

 

Provides total mobility:

·        Has a lightweight, custom padded carrying-case  

·        Weighs 17 pounds

·        Operates on 100 percent Oxygen

·        Requires no electricity or batteries

·        Performs essential life support functions anywhere medical emergencies occur

·        Fits perfectly on the Life Support Liter  (Model S-410) (this is a link)

 

Accessories Available:   (note: these link to accessories) 

·        Oxygen Tanks “D” or “E”

·        IV Pole and Connector

·        Mobile Oxygen System (sold with or without tanks)

·        Esophageal Obturator Airway (EOA) Kit

·        Esophageal Gastric Tube Airway (EGTA) Kit

·        Suction Aspirator

·        Trans fill device for Oxygen Cylinders

·        Hospital /Ambulance Regulator

·        Oxygen Mask with Flow Control

 

 

Physical Specifications:

·        Size: 20in. W x 17in. D x 5in. H (50.8 cm. W x 43.1cm. D x 12.7cm. H)

 

Weight:

·        17 lbs Including Chest Compressor (6.8 kg.)  

 

Material:

·        Exterior Covers – Medical Grade Kydek Polymer

·         Compressor Cylinder – Medical Grade High Impact Polycarbonate

 

Operational Information:

·        Power Source: Compressed Oxygen

·        Required Pressure: 50 – 90 PSI (4 – 6 BAR)

·        Oxygen Concentration: 100 % During Resuscitation

·        Compression Rate: 100 Compressions per minute      

·        Compression Force: 0-70 kilograms of thrust

·        Operating Temperature:  32 degree to 122 degree F (0 degree to 50 degree C)           

Packaging Details:

Exterior Shipping  Box :

·        Size: 26in. L x 9in.W x 24in. H (66.04cm. L x 22.86cm W x 60.96cm. H)

·        Grade: 275 Double Wall Construction  (275 lb/sq-in)

·        Capacity:  90 lb

·        Material:  Double Wall Corrugated Material

 

Internal Packaging:

·        Sealed Air Foam Packaging: (2) Sheets Surrounding the HLR-301

·        Bubble Wrap: All Accessories are protected by Industrial Strength Bubble Wrap

·        Inserts: Corrugated sheets are placed in the bottom and in the top of the shipping box